factory glass fiber chopped strands
Glass fiber reinforced plastic is on the basis of the original pure plastic, glass fiber and other additives, so as to improve the use range of the material.Generally speaking, most of the glass fiber reinforced material use on the structure of the product parts, is a kind of structural engineering materials;Such as: PP ABS PA66, PA6 PC POM PPO PET PBT, PPS.
Advantages:
1. After glass fiber reinforced, glass fiber is high temperature resistant material, therefore, reinforced plastic heat resistance than without the glass fiber used to improve a lot, especially the plastic nylon;
2. After Glass fiber reinforced, due to the addition of glass fiber, limit the move each other, between the plastic polymer chain, therefore, reinforced plastics shrinkage rate decreased a lot, also greatly improve the rigidity;
3. After glass fiber reinforced, reinforced plastic won't stress cracking, at the same time, the plastic shock resistance for improvement of the many.
4. After Glass fiber reinforced, glass fiber is high strength material, thus raised the strength of the plastic, such as tensile strength, compression strength, bending strength, improve a lot;
5. After Glass fiber reinforced, because of the addition of glass fiber and other additives, reinforced plastics combustion performance a lot, most of the material cannot fire, is a kind of flame retardant materials.
Generally, glass in people's minds is a very vulnerable and fragile items, but in fact if the glass smoke into silk, the performance of glass fiber is very superior, both in the pressure resistance and tensile strength on has a very good performance, and this kind of material in use, there are many considerations.
Note 1, this kind of material is very thin and lighter, so very easy to air lift, flying in the air, so people at the time of use, must pay attention to the choice of environment, do not easily to be the material into the air, once that they are exposed to the eyes, should be immediately with water for washing filling and immediate medical care.
Note 2, glass fiber is a substance with the human body is hard, so in the process of contact must we wear the masks, absolutely can't put it into the body inside, there are workers because tired calendar month to inhale this kind of fiber, finally lead to internal bleeding and death.
Note 3, try to avoid using manual to operate this kind of material, is the best way to secure isolation facilities to carry out the operation, so that we can most effectively avoid fiber direct contact with the human body, which can ensure the health security of the operating personnel.Although the practical function of the material is very strong, but most people need to be aware of their own safety.
Keywords in the article: fiberglass chopped strand Milled E-glass fiber adiator plastic tanks red phosphorus potassium chlorate
